archyworldys

better image quality but more moderate IPS gains than FSR 1.0

Review of two tests that lead to the same conclusion.

AMD’s FidelityFX Super Resolution 2.0 technology is available for gaming Deathloop since May 12. During the presentation last March, AMD promised better image quality than the FSR 1.0, at the cost of slightly higher resource consumption. Verification through two tests; one made by W1zzard for the TechPowerUp site, the other by Aaron Klotz for the Tom’s Hardware US site. We will focus mainly on the second which has the advantage of precisely informing the average number of frames per second conferred by the FSR 1.0, FSR 2.0 as well as the DLSS of NVIDIA and this, for different graphics cards.

Image 1: AMD FSR 2.0: Better image quality but more moderate IPS gains than FSR 1.0

For the purely visual aspect, TechPowerUp offers the video below opposing the FSR 1.0, the FSR 2.0 and the DLSS 2.3 in several scenes of the game Deathloop. You can view full screen still images in different definitions on the source.

Some additional comparisons offered by Tom’s Hardware US in 1080p.

Image 2: AMD FSR 2.0: Better image quality but more moderate IPS gains than FSR 1.0Image 2: AMD FSR 2.0: Better image quality but more moderate IPS gains than FSR 1.0
Deathloop 1080p native

Les gains d’IPS

Regarding the gains in frames per second, AMD had announced the color, the FSR 2.0 is less saving than the FSR 1.0. At 1080p/Ultra, a Radeon RX 6700 XT averages 110 frames per second. The FSR 1.0 quality mode pushes the counter to 149.4, and 167.6 in performance mode. Under the same conditions and with the same modes, the FSR 2.0 tops out at 135.8 IPS in quality mode, 152.2 IPS in performance mode. In any case, the gains compared to native rendering remain of course significant.

Image 6: AMD FSR 2.0: Better image quality but more moderate IPS gains than FSR 1.0Image 6: AMD FSR 2.0: Better image quality but more moderate IPS gains than FSR 1.0

With a GeForce RTX 3070, the performance differences are very small between DLSS, FSR 1.0 and FSR 2.0 at 1080p. These technologies provide about 10 images per additional compared to the native definition.

Image 7: AMD FSR 2.0: better image quality but more moderate IPS gains than FSR 1.0Image 7: AMD FSR 2.0: better image quality but more moderate IPS gains than FSR 1.0

Same experience but in 2160p this time. While FSR 1.0 quality mode allows the Radeon RX 6700 XT to average above 60 FPS, FSR 2.0 with the same setting lowers the framerate at around 50 fps. In the case of the GeForce RTX 3070, DLSS Performance offers the biggest boost in FPS.

ScriptRadeon RX 6700 XTGeForce RTX 3070
2160p native35,135,9
FSR 1.0 Quality60,857,7
FSR 1.0 Performance79,774
FSR 2.0 Quality51,452,3
FSR 2.0 Performance67,567,1
DLSS Quality52,4
DLSS Performance76,9
Average number of frames per second on Deathloop in 2160p/Ultra

What about older graphics cards?

Since not everyone is lucky enough to have a graphics card as recent as a Radeon RX 6700 XT or GeForce RTX 3070, our colleague also carried out some measurements with older references: GeForce GTX 1080, GeForce GTX 970 , RX Vega 64, RX 480, at 1080p/Ultra for all but the proven GTX 970 at 1080p/High.

ScriptGeForce GTX 1080GeForce GTX 970RX Vega 64RX 480
1080p native733968,537,1
FSR 1.0 Quality93,248,486,344
FSR 1.0 Performance107,453,898,648,3
FSR 2.0 Quality86,145,180,340,2
FSR 2.0 Performance96,948,590,144,2
Average number of frames per second on Deathloop en 1080p / Ultra ou High (GTX 970)

Conclusion

In conclusion, Aaron Klotz believes that AMD “did a great job with FSR 2.0 finding a way to deliver image quality similar to DLSS 2.0, without the hardware requirements that NVIDIA’s upscaling technology requires” ; the FSR 2.0 actually has the advantage of accommodating a wide range of GPUs, including old and competing ones.

Same story for W1zzard from TechPowerup. The latter writes: “AMD has done the unthinkable: the new FidelityFX Super Resolution FSR 2.0 is excellent, as good as DLSS 2.0, even DLSS 2.3. Sometimes it does a little better, sometimes a little worse, but overall it’s a huge win for AMD.”.

At this stage, the only question finally concerns the adoption of FSR 2.0, subject to the goodwill of the developers who must implement the technology in their productions. For now, the only game to benefit from FSR 2.0 is Deathloop. AMD has formalized a dozen titles that will soon adopt it. For comparison, in just under a year, the FSR 1.0 had gone from 7 games at launch to over 80.

Sources : TechPowerUP, Tom’s Hardware US

Trending