How to use the Apple Watch Ultra siren

The siren is designed to draw attention to yourself if you get injured or lost while exploring To do so, Apple has included a second speaker on the Ultra that can emit 86 decibels of sound with a range of up to 600 feet When activated, the siren switches between two distress-like sound patterns and signals known distress.

Once the siren is on, your watch screen will display a red border and a call button so you can call emergency services you’ll also see the percentage of battery left According to Apple, the siren can last for several hours although this obviously depends on how much charge is left when the siren is on .

Theverge, which specializes in technology news, revealed multiple ways to access the siren from your watch. Here’s how to get started.

How to use siren from app list grid

Like the new Depth and Compass app, Siren has its own app that can be accessed from the main app list or network, depending on how you organize your apps.

  • Press the Digital Crown to access the grid or menu.
  • From the grid, locate and tap the Siren app icon. It’s red with a white horn in the middle.
  • In the Format list, your apps are listed alphabetically. Scroll down and tap Siren.
  • Press the start button to start the siren to stop it, press the same button again.

How to use the siren from the emergency menu

  • Press and hold the side button until the emergency menu appears. You should feel a tactile sensation.
  • The siren slider will be at the top. Move the slider from left to right to activate.

How to use the siren of the action button

The siren can also be activated by pressing and holding the action button for a few seconds (you can find more details on how the action button works here) however, to do that you will first need to enable this feature in the action button settings.

How to use the siren on the watch

  • Open the Settings app.
  • Scroll down to the Action Button List.
  • Scroll down to Siren.
  • Press the Hold button to turn on the toggle to enable.

How to use Siren on iPhone

  • Open the Watch app on your iPhone.
  • On the My Watch tab, scroll down to the Action Button menu.
  • Scroll down to Siren.
  • Press the Hold button to turn on the toggle to enable.
  • Keep in mind that when using a siren, the actual loudness may be affected by your environment.
  • The volume will also increase gradually, so you will have time to make sure the watch is away from your face before it reaches full volume.
  • Finally, if you’re concerned about battery life, you can always enable Low Power Mode to extend the Ultra’s battery life.

And Madam previously talked about the steps to unpair your Apple Watch either with or without your iPhone.

How to unpair Apple Watch from your iPhone

  1. Make sure you have the latest software updates installed on your iPhone and Apple Watch.
  2. Put your phone and watch it together (you can’t perform these steps remotely).
  3. Open the Apple Watch app on your iPhone.
  4. Tap the My Watch tab and then All Watches at the top.
  5. Tap the info button next to the name of the watch you’ve unpaired.
  6. Tap Unpair Apple Watch at the bottom of the page.

If you have a cellular model, you will be asked to choose to keep or remove your cellular plan, if you pair a new watch and are not using that watch again, remove it; You can add it to your new watch if you plan to pair your Apple Watch again at some point, keep the plan.

  1. Click to confirm that you really want to unpair the watch.
  2. Enter your Apple ID password to disable Activation Lock.
  3. The phone will create a new backup of your watch before you unpair. You can use this to set up a new Apple Watch.
  4. Once the watch has been completely unpaired, you will see the start pairing message.

How to unpair your Apple Watch without your iPhone

If you no longer have the iPhone that your watch was paired with, you’ll need to remove Activation Lock using your iCloud account to pair it with a new phone.

  1. On a computer, go to and sign in with your Apple ID and password.
  2. Select Find iPhone.
  3. Click All Devices and choose your Apple Watch.
  4. Select the info button next to the device.
  5. Select Remove Apple Watch – This will remove the activation lock and allow you to pair it with a new phone.

Follow more: What is the right router to strengthen the Wi-Fi signal at home

You can follow the latest news through my lady’s account on Twitter