OPPO Reno7, 7 Pro and 7 SE specs revealed, certified by TENAA

OPPO Reno7 Series is prepared to be officially launched in China on November 25. The specifications of all 3 models in the family are Reno7, Reno7 Pro and Reno7 SE. Now, some have been revealed from Certified through TENAA.

Let’s start with Reno7 SE (Model PFCM00) will have a body size of 160.2 x 73.2 x 7.45 mm, weight 171 grams, with a 6.43-inch AMOLED screen, FHD + resolution, with 8GB of RAM + 64/128/256GB of ROM, a 4500mAh capacity battery and a rear camera. 48 + 2 + 2 million pixels, the front camera has a resolution of 16 million pixels.

later as Reno7 (model PFJM10) that will have a body size of 156.8 x 72.1 x 7.59 mm, with a weight of 185 grams, has a 6.43-inch AMOLED screen, FHD +, has the same battery as Reno7 SE at 4500mAh, has 8/12GB of RAM, 128/256GB of ROM as well. There is a front camera that uses a Sony IMX709 sensor with a sharp 32 megapixels, while the rear camera has 3 lenses with a resolution of 64 (OmniVision OV64B sensor) + 8 (Ultra-Wide) + 2 million pixels.

and finally is Reno7 Pro Which is the top model (model PFDM00) has a body size of 158.2 x 73.2 x 7.45 mm, with a weight of 180 grams, with a 6.55-inch AMOLED display, sharp FHD +, has a 4500mAh battery, 8/12GB RAM, 128 ROM. /256GB, while the rear camera has a resolution of 50 (Sony IMX766) + 8 (Ultra-Wide) + 2 million pixels and has a 32-megapixel front camera with a Sony IMX709 sensor.

In addition, the rumored specification of the Reno7 series will support the screen Refresh Rate 90Hz and scan the fingerprint on the entire screen. The chips that will be used in Reno7 SE, Reno7 and Reno7 Pro will be Dimensity 900, Snapdragon 778G and Dimensity 1200-Max respectively, as well as fast charging at 33W, 60W and 65W.

See also  iOS 15, macOS Monterey and others: what will be the new versions of Apple operating systems

source: gizmochina