A hardware-aware SRP aerial edge framework cuts mining IoT latency 82.5%, achieving 1.05 s versus 6.00 s local execution at 3.0 Mbits workload.
Industrial Internet of Things networks in deep-pit mines face severe non-line-of-sight signal blockages and complex cognitive coexistence constraints.
Operating in topologically constrained environments demands low-latency, reliable, and spectrum-aware communication infrastructures that traditional ground systems simply cannot deliver reliably.
Legacy primary systems impose strict cognitive coexistence rules, making spectrum reuse a delicate balancing act for industrial digital-twin deployments.
At a workload of 3.0 Mbits the framework attains 1.05 s against 6.00 s for local execution, an \(82.5\%\) reduction, while maintaining Jain’s fairness index above 0.9 and a fading-averaged cognitive safety headroom of 2.5–12.5 dB below the ITL threshold, according to data published by Nature.
Unlike ideal reflecting-surface models that assume lossless unit-modulus phase shifting, the engineering approach adopts a hardware-constrained smart reflecting panel model whose phase-dependent amplitude response is fitted to measured varactor-tuned element data.
The architecture optimizes reflection coefficients directly on the resulting non-convex manifold to solve a worst-case safety-response-time minimization problem.
This formulation jointly optimizes quasi-static aerial edge machine placement, panel passive beamforming, uplink transmit-power allocation, computation-frequency allocation, and task-partitioning ratios under statistical interference-temperature-limit constraints.
A two-level decomposition solves the complex problem, utilizing an outer bisection search for target latency alongside an inner block coordinate descent loop.
The inner loop combines closed-form task and computation updates, primal-dual weighted MMSE power allocation, Riemannian manifold optimization, and a trust-region successive convex approximation for placement.
Surrogate steps gain acceptance only when they do not increase a common violation function, ensuring the monotonicity of the inner loop holds by construction without claiming global optimality.
The returned latency is achieved by an explicitly verified feasible configuration that upper-bounds the optimum.
The achieved latency lies within 0.05 s of the ideal-reflection bound, a narrow gap that analysis attributes not to near-optimal beamforming, but to the deployment being edge-computation-limited.
Uplink transmission accounts for roughly \(5.5\%\) of the offloading time, establishing that the panel’s practical role functions as insurance against blockage rather than a direct latency reduction tool.
Related reading
Discover more from Archyworldys
Subscribe to get the latest posts sent to your email.